Эргэдэг хүрд хатаах машин

Introduction of Rotary Drum Drying Machine

Rotary drum dryer is a device that heats and dries materials. Цаашлаад, the drum dryer is primarily used to dry granular materials within a specific humidity and particle size range, гэх мэт нийлмэл бордоо болон organic fertilizer.

Our firm meticulously designs the latest type of drying equipment with the benefits of low noise, high efficiency, low energy consumption, болон easy operation. Энэ хооронд, this rotary dryer has a wide range of applications, including the feed pellet industry, building materials drying, animal manure drying, гэх мэт.

Application of Rotary Drum Drying Machine for Fertilizers

Бордоо үйлдвэрлэх шугам

It is suitable for organic болон compound fertilizer production line, such as animal manure waste, poultry manure, sheep dung, pig manure, chicken manure, cow manure and sludge.

Feed & Agriculture

It is suitable for make feed, agriculture production and biomass pellet materials like straw, fish meal, leaves, food factory waste, wood chips, shavings and corn residue.

Building Materials

It is appropriate for drying construction materials, specifically for sand, cement, ore, slag, coal, metal powder, clay, болон kaolin, гэх мэт.

Other Industries

It is applicable to the drying of powder and granular materials used in the production of phosphate fertilizer, mining industry, as well as metallurgy, chemical and other industries.

Part & Accessories of A Rotary Drum Drying Machine

The rotary dryer is mainly composed of the following components: а cylinder, front and rear roller rings, wheel, small gear, feeding and discharge mechanism, lifting plates, reduction drive, мотор, hot air duct, air blast furnace, and other parts. Үүнээс гадна, we can produce gas burner, combustion chamber, эсвэл elevator, belt conveyor, constant weight feeder, dust collector, induced draft fan, and other devices based on the needs of the customers.

Mechanism of A Rotary Drum Drying Machine?

The Cylinder Body

The rotating cylinder body is flange connected or directly welded, supported by two riding wheels as the supporting device and driven by the drive gear to rotate the simplified body.

Installation Angle

The cylinder body is installed with angle, and the materials come into contact with hot flue gas while turning inside the revolving cylinder body and moving ahead to achieve the drying goal.

Inlet & Outlet

The machine has feeding and discharging mechanisms. There is a sealing plate between them so that reduces the spillage of materials.

Inducer

The inducer introduces hot air from the hot blast furnace into the inside of the dryer to exchange heat with the wet materials.

The Elevator

The materials are supplied by the elevator from the feeding port and flow within the dryer under gravity after being broken up, crushed, dispersed, and equally distributed, assuring the heat exchange effect of the materials inside the dryer.

Hot Blast Furnace

Hot gas is generated by the hot blast furnace, moving from the bottom to the top, contacting with the materials, transferring the heat to the materials through heat conduction, convection, radiation and other ways. Тиймээс, it continuously makes the temperature of materials rise and the moisture evaporated. Then the materials meeting the moisture requirements are discharged from the lower outlet, and also the gas containing water vapor.

The Main Work Procedure of Rotary Drum Drying Machine

Feeding

The raw materials enter the inside of the drying rotary drum after passing through the loading machine. After the process of high temperature, deodorization, dust removal and cooling, the materials are dried to less than 10% moisture content at one time.

Rotating

The materials in the rotary drum cylinder are dried by the spiral blade and intermittent lifting plate in the process of repeated action and lifting between the inner and outer cylinders.

Moisture Requirement

According to the ultimate moisture requirement of materials after drying in different industries, the moisture content of compound fertilizer after drying is lowered from 20%-30% руу 2%-5%, and organic fertilizer is reduced 10% руу 40%.

Postprocessing

More importantly, the rotary dryer should be used with the cooling machine, because the high temperature of the dried fertilizer is not conducive to storage. Цаашлаад, it can also be modified specifications according to the customers’ own requirements to ensure the maximum utilization rate of the dried fertilizer.

Features of Rotary Drum Drying Machine

A variety of lifting plate combination distribution, creates no wind hole phenomenon, and makes materials evenly distributed and fully exchange heat with hot air, with good drying effect. There are vertical baffle plates inside the cylinder to prevent materials from sticking and improve its fluidity.

The cylinder body adopts combined structure and weldment, which improves the precision of equipment, and makes it easier to transport and install. The dryer is equipped with an inlet and outlet device as well as a specific sealing device, which can greatly enhance overall machine performance and increase production capacity.

It is equipped with hot blast furnace, and has features of rapid combustion, sufficient heat supply, high thermal efficiency, as well as excellent drying time regulation. Энэ хооронд, vertical baffle plates expand the contact area between materials’ heat and cold air exchange, ensuring sufficient heat exchange with low energy consumption and high efficiency.

It integrates the complete system of heating, хатаах, and dust collection, realizing mechanization and automation of operation, and meeting the requirements of environmental protection.

Rotary drum dryer can be widely used in organic fertilizer, нийлмэл бордоо, biomass pellet, feed, agriculture, building materials, metallurgy, mining and chemical industry such as drying organic waste, clay, slag, iron powder, fly ash, гэх мэт.

According to slope of a rotary drying recommendations and the distribution of the lifting plate, it help enhance heating efficiency, and is easy to run, occupies a small area, and is convenient to regulate and control.

Rotary Drum Drying Machine Technique Parameter

Загвар	Motor Power (кВт)	Reducer Model	Temp of Inlet (℃)	Angle of Installation（°）	Speed (r/min)	Хүчин чадал (т/ц)
SXHG-0808	5.5	ZQ250	≥300	3-5	6	1-2
SXHG-1010	7.5	ZQ350	≥300	3-5	6	2-4
SXHG-1212	7.5	ZQ350	≥300	3-5	6	3-5
SXHG-1515	11	ZQ400	≥300	3-5	6	4-6
SXHG-1616	15	ZQ400	≥300	3-5	6	6-8
SXHG-1818	22	ZQ500	≥300	3-5	6	7-12
SXHG-2020	37	ZQ500	≥300	3-5	5.8	8-15
SXHG-2222	37	ZQ500	≥300	3-5	5.5	8-16
SXHG-2424	45	ZQ650	≥300	3-5	5.2	14-18