As a kind of granulation equipment from fine power material, except for organic waste, the disc granulator can be applied to treat various non-viscous materials in the state of powder, granular or small pieces, such as coal powder, cement, clinker, limestone, shale, coal gangue, clay, жана башкалар.

• Granulation rate up to 93%; large output.
• Intuitive operation; being adjusted at any time.
• Great flexibility of raw materials; wide range of finished product granularity.
• Smooth operation; durable equipment; long service life.
• Disc granulator price is the lowest of all granulators.

• Dust and exhaust gas are prone to overflow and cause environmental pollution.
• High requirements for materials: large mesh, small particle size, thin fibers; good bond strength, no change in the nature of raw materials when encountering water, clay, oil and other adhesives.
• Drying procedure is required after granulation by disc pelletizer.

Flat die granulator is ideal for coarse fiber granulation such as wood chips, саман, күрүч кабыгы, cotton stalk, weeds and other kinds of agricultural waste, as well as domestic garbage, waste plastics, and industrial waste.

It is useful for granulation and briquetting of materials with low adhesion rate and difficult to shape.

• Before granulation, you can primarily process the raw materials after batching without drying and crushing, which can save a lot of energy.
• Granulation rate up to 90%; the processed granules of uniform granularity and high organic content; no binder required in pelletizing.
• High particle strength; high finished products rate; direct screening after granulation.
• Small equipment size; small occupation area; high degree of automation.

• Low production capacity; high equipment cost.
• The material needs low water content and high cohesiveness.
• Serious wear of roller surface and molds.

New type organic fertilizer granulator is suitable for granulation of light fine powder materials. The finer powder materials, the higher the particle sphericity, and the better the ball quality.

The general specifications for materials should be less than 300 mesh size is appropriate. Typical application materials are chicken manure, чочконун кыгы, уйдун кыгы, саман, kaolin and other organic waste with moisture content of 20%-40%.

• Strong production capacity; simple principle; fast granulation speed; high quality products.
• Qualified granulation rate up to 90%; the large ball rate is less than 15%; wide adaptability of raw materials.
• Smooth operation; durable equipment; long service life.

• Large equipment size and large occupation area.
• Subsequent drying and cooling is necessary, and the equipment price is relatively high.

It is appropriate for the granule polishing of organic fertilizer like chicken manure and other livestock manure as the primary raw material, as well as compound fertilizer.

Its usage is on the basis of granulators. Ошентип, you usually use it to polish granules produced by the extrusion granulator жана disc granulator, which makes pellets more beautiful.

• High output; flexible arrangement: You can install single or several polishing machines at the same time.
• Granulation rate up to 95%; consistent granularity of the finished product; round and smooth surface; high granule strength.
• One-step forming; no return material; less energy consumption and low production cost.